Best Way To Fix Konica Minolta Bizhub 361 Error Code Problems

Over the past week, some users have reported that they are facing konica Minolta bizhub 361 error codes.

  • Code: C-0201
  • Description. The high limit sensor /1 (PS6) may not activate for a certain time after the paper feed motor /1 (M7) is turned on.
  • Causes: Magnetic Paper Lift Generator /1 (M7) High Limit Detection /1 (PS6) Printer Control Board (PRCB)
  • Code: C-0202
  • Description. The high limit sensor /2 (PS13) is unlikely to work during a certain menstrual cycle after turning on the motor of the paper escalator /2 (M8).
  • Causes: Automotive Paper Elevator /2 (M8) High Limit Sensor /2 (PS13) Printer Control Board (PRCB)
  • Code: C-0203
  • Description. The best limit sensor /3 (PS114) does not turn on too much for a certain time after the paper lift motor /3 (M124) is turned on.
  • Causes: Paper lifter /3 (M124) High limit switch/sensor /3 (PS114) PC control board (PCCB)
  • Code: C-0204
  • Description. High limit indicator /4 (PS123) does not turn on within the set time when the lift motor is turned onTags /4 (M125).
  • Causes: Paper lift motor /4 (M125) High limit sensor /4 (PS123) PC control board (PCCB)
  • Code: C-0205
  • Description. The high limit scan (PS152) does not activate within a reasonable time after the general paper lift motor (M151) is turned on.
  • Causes: Motor Paper Feeder (M151), Upper Limit Sensor/Probe (PS152), LU Card Reader (LTDB)
  • Code: C-0206
  • Description: Paper lift unit (M5) malfunction. Shift motor problem (M4). Mains switching motor failure (M3).
  • Causes: Paper lift motor (M5) Switch motor (M4) Door switch motor (M3) PC control table (PCCB)
  • Error

    C-3804 Description: When melting the auxiliary sensor, the temperature is indeed abnormal. – In standby mode, mat melt heating section /2 (L3) onturns off for more than 12 seconds at a time. C-5402 Description: Power switch (SW2) timed out C-1119 Description: FS-523: Punch motor failure (M11). – Punch encoder sensor (PS15) does not immediately turn off the product for a certain time, M11 turns on. C-4401 Description: Driver board (LDB) anomaly. – When overcurrent flows for the resulting laser.

    Code Erreur Konica Minolta Bizhub 361
    Kody Bledow Konica Minolta Bizhub 361
    Konica Minolta Bizhub 361 오류 코드
    Konica Minolta Bizhub 361 Felkoder
    Konica Minolta Bizhub 361 Foutcodes
    Konica Minolta Bizhub 361 Codici Di Errore
    Konica Minolta Bizhub 361 Fehlercodes
    Codigos De Error Konica Minolta Bizhub 361
    Codigos De Erro Konica Minolta Bizhub 361
    Konica Minolta Bizhub 361 Kody Oshibok